页岩气开采对环境的影响分析及对策建议

我国页岩气资源非常丰富,但勘探开发难度巨大。分析了页岩气资源大规模开发对水资源、大气环境、地质环境及周边环境产生的影响。提出了需要健全的页岩气开发的环境监管法规规范,只有制定好产业政策,加强对技术和开采原料的研究等,才能促进页岩气产业健康、快速发展,更好地服务于中国和谐社会的建设与发展。     

Mg gas infiltration for the fabrication of MgB2 pellets using nanosized and microsized B powders

MgB₂ superconductor pellets were synthesized through Mg gas infiltration method using nanosized- and microsized B powders. There was a marked difference in the superconducting properties of the two samples, particularly in the pinning force and dominant pinning mechanism. The microstructures of the samples were observed using HR-TEM and STEM-HAADF, and the results showed that the primary reason for the difference in the superconducting properties is the distribution of the nanosized second-phase particle MgO. Additionally, a feasible reaction model for the Mg gas infiltration method was established. Compared to the Mg liquid infiltration method, the gas infiltration showed better penetrability ability with a small amount of residual Mg. This study presents a novel synthesis process to fabricate an MgB₂ pellet with superior density and superconducting properties. This method can be used in multiple applications such as superconducting bearings, compact superconductor magnets, and magnetic shielding.     

Natural Gas Production

Current data on natural gas production, as well as a breakdown of production by country. Updated on a monthly basis.     

气瓶内部淬火过程的流动换热特性

 大直径厚壁气瓶内部淬火时的流动换热过程极其复杂，受到多种因素的影响，而研究气瓶内部压强和温度的变化规律对改善流动换热效果、提高产品组织性能具有重要的理论指导意义。以914 mm厚壁气瓶和瓶内流体为研究对象，建立了二维等效流 固耦合模型；采用多喷嘴系统对气瓶内外进行喷水淬火，研究了气瓶总长、喷水流速及淬火时间对瓶内压强及内壁温度的影响，通过间歇淬火试验验证了数学模型的正确性。结果发现，气瓶长度对瓶内压强和瓶壁温度的影响显著，喷水流速次之，当喷水流速大于8 m/s后，水量对瓶壁的冷却效果大大降低；气瓶内壁长度方向的温度梯度分别随气瓶总长的增加和淬火时间的延长而减小，但基本不受喷水量的影响。     

最优化算法与纯元素谱剥离相结合的能量色散X射线荧光谱解谱方法

在进行能量色散X射线荧光光谱(EDXRF)解谱时,如果给定样品的元素构成,采用纯元素谱图剥离的方式会更加合理,但由于每个元素的谱线都不止一条,如果仅仅针对主线对齐做剥离,会导致结果的严重失真,同时剥离次序对解谱结果有较大影响。介绍了一种最优化算法与纯元素谱剥离相结合的EDXRF解谱方法,该方法以多个纯元素谱的强度大小和峰位漂移道数作为变量构建残差方程,并用最优化计算的方法去调整,直至残差达到极小。实验采用强度顺序剥离、能量顺序剥离和最优化算法拟合3种方法分别对谱线重叠较为严重的La-Ce-Pr-Nd混合液样品的L系谱线进行了解析,结果表明最优化计算方法拟合的谱图与原始谱的残差 (1415.0)比另两种方法(166094.0和3192.7)大幅度缩小,拟合谱与原始谱更为吻合,并且方法在实现时对初值不敏感,解谱精度也不依赖于剥离次序。     

能源土边界面模型的应力更新算法及算例分析

水合物的存在会显著影响能源土的刚度、峰值强度与剪胀性。针对已有能源土模型的不足，结合边界面模型的建模思想，构建一个新的能源土边界面模型，模型参数较少，能够恰当反映能源土的应力-应变关系。计算能源土变形问题的核心在于正确积分塑性本构方程，应用完全隐式回退Euler算法，建立模型应力及塑性内变量的更新公式，并给出显式的一致性切线模量表达式。基于ABAQUS软件提供的二次开发接口，编写模型的用户材料子程序，应用已有试验数据验证程序正确性。最后应用开发的子程序对能源土的平面应变试验进行模拟，分析水合物饱和度对剪切带倾角与孔隙比的影响。     

An integrated approach for aircraft turbofan engine fault detection based on data mining techniques

The present study proposes an algorithm for fault detection in terms of condition‐based maintenance with data mining techniques. The proposed algorithm is applied on an aircraft turbofan engine using flight data and consists of two main sections. In the first section, the relationship between engine exhaust gas temperature (EGT) as the main engine health monitoring criterion and other operational and environmental parameters of the engine was modelled using the data‐driven models. In the second section, a data set including EGT residuals, that is, the difference between the actual EGT of the system and the EGT estimated by the developed model in the health conditions of the engine, was created. Finally, faults occurring in each flight were detected based on the identification of abnormal events by a one‐class support vector machine trained by the health condition EGT residual data set. The results indicated that the proposed algorithm was an effective approach for inspecting aircraft engine conditions and detecting faults, with no need for technical knowledge on the interior characteristics of the aircraft engine.     

Prediction of methane adsorption content in continental coal-bearing shale reservoir using SLD model

Shale gas, as an important unconventional resource, has drawn global attention. It is mainly composed of adsorption gas and free gas. Adsorption gas content could play an important guiding role on both the selection of favorable perspective area and the exploration and exploitation of shale gas resources. In order to accurately measure adsorption gas content, a new approach was established to predict the adsorption isotherm of methane on shale. Based on the simplified local-density (SLD) method, both the adsorption isotherms of illite, illite/smectite mixed-layer, cholorite and type III kerogen and the total shale rock could be well fitted. The fitting results show good coincidences with the true experimental test data, which proves the method is reasonable and dependable and the prediction results are effective and credible. In addition, the good simulation results show that the SLD parameters can reflect the pore structure characteristics and corresponding adsorption characteristics of the shale samples, which can be used for the quantitative characterization of shale pore system.